22.8nm |
The visit also heralded trailer problems which eventually resulted in the boat being left on the pontoon at Pin Mill and a return inland with the trailer. The problem eventually turns out to be the brakes which needed replacing and was probably self-induced.
Earlier last month, I replaced the breakaway cable. It seemed to be slightly shorter than the old and, as a result, was set too tightly. This tripped the trailer brakes to act whilst driving. Even though I stopped fairly soon afterwards, the damage had been done. I'm now due to pick up the mended trailer on Monday and Daisy II will return to dry land forthwith.
Whilst this is annoying and, most likely, expensive, the silver lining enveloping this cloud is that I was forced to leave Daisy II on the pontoon at Pin Mill, by kind agreement of the proprietors of Kings Boatyard. This left her rigged and ready to access for my planned end of term cruise.
End of term cruise: 20-23rd July
And so, term finally ended and I charged down to the coast for a celebratory mini-cruise.
red track - Wednesday evening through to early Friday morning; yellow track - Friday; white track - Saturday |
20-21 July - Pin Mill to Southwold, night sail return trip
Mindful of the famous Ransome book title: 'We didn't mean to go to sea', I really didn't mean to go to Southwold. It really was a case of seeing what the wind and tide were doing and then taking advantage of what was on offer.
Casting off from the pontoon in the late evening on Wednesday 20th, after a splendid pint of Broadside at the Butt and Oyster...well, the pint was essential since I had to wait for the tide...
Initially, I thought Woodbridge would be an option but passed the mouth of the Deben and headed on to Orford Haven. I then considered a trip up to Snape, but imagined there would be insufficient time to reach the head of the Alde by HW. So I found myself pressing on north east for the first time and rather impulsively.
Orford Ness passed by...
After Orford Ness, the coast takes a significant turn to the north, passing Aldeburgh...
I should have stopped at Southwold for the night but, having reached this point on a whim, the prospect of a night return sail beckoned in increasingly benign conditions. The tide had now turned and I would have the flood with me - just as well since there was little wind until Orford Ness was back in view. On the way back, was it sunset over Sizewell, or are we in the throes of an apocalyptic nightmare...!?
Mad trip to Southwold with night time return sail: 68.5nm |
21st July - Halfpenny Pier - refueling at Harwich - River Stour to Walton Backwaters
After yesterday's mad antics, today demanded more leisurely arrangements.
An easterly wind had set in so I took the last of the flood up the Stour just short of Wrabness, and then had a pleasant beat back downstream, rounding Harwich and then crossing Dovercourt Bay to the Walton Backwaters and my usual anchorage in Landermere Creek.
Halfpenny Pier, River Stour to Landermere Creek: 17.6nm |
Landermere is my favourite anchorage and didn't disappoint - a tranquil evening with beer, wine and a couple of films to watch. The next morning brought in a familiar return to 'base' - a trip I've done many times before. Winds were NE and light. I motored from the anchorage past Crabknowe Spit and then hoisted sails for a pleasant reach across Dovercourt Bay. The wind turned more northerly as I approached Harwich so I had to put in a tack to round the pier at Blackman's Head but then sailed uninterrupted across the harbour, into the Orwell and back to Pin Mill. Daisy II is now once again on the pontoon there and I will hopefully return with trailer early next week to bring her home.
Return to Pin Mill - 10.8nm |
Hi Julien!
ReplyDeleteThis is Pablo. I´m discovering your blog and I think I´m following DA members who are fitting booms on drascombe coasters. I did it on my mizzen, and then got encouraged enough as to think on upgrading to a main boom too. Details are so clear from this blog of yours!! So I´d like to know the main dimennsions you´ve decided on the matter (I mean lenght&diametter of your main boom).
Best Regards,
Pablo
Hi Pablo
DeleteMany thanks for your comment and for reading my blog.
I'm glad you're considering a boom - I really enjoyed making mine and find it really enjoyable to sail with.
In answer to your question, the length is 3100mm and the diameter is 50mm. I'm happy with these dimensions which have proved more than sufficient for my purposes. I hope that helps; please do not hesitate to ask if you have any further queries.